A sliding enclosure is the practical luxury choice for bathrooms where a swing door would fight the toilet, vanity, or doorway. Because the panels glide on rollers instead of swinging outward, you get a full-width opening with zero clearance needed — ideal for smaller bathrooms, aging-in-place layouts, and anyone who wants an unobstructed entry. Modern frameless sliders look nothing like the old aluminum-framed bypass doors of the past: thick tempered glass, slim stainless track headers, and exposed roller hardware that reads as contemporary design.
We install and repair interior and exterior sliding glass — shower and tub enclosures, barn-style doors, and patio doors — custom measured for your exact opening.
Why Choose a Sliding Shower Door
Sliding doors save space, let natural light through, and open the full width of the shower. With thick tempered glass and slim stainless hardware, a modern slider reads as contemporary design, not the aluminum bypass doors of the past.
Sliding Styles We Install
Bypass enclosures (two sliding panels over a fixed panel), single barn-style doors on exposed stainless track, in-line and corner sliders, tub screens with sliding panels, and steam-ready sliders with gasketed edges.
Glass & Finish Options
3/8” (10 mm) tempered for smooth roller operation, or 1/2” (12 mm) for wide barn-style panels. Clear, low-iron, rain, frosted, and tinted glass, with rollers in chrome, brushed nickel, matte black, or gold, plus optional EnduroShield coating.
Roller Systems: Where Quality Shows
The rollers are the heart of a sliding enclosure, and this is not the place to compromise. We install precision stainless-steel roller systems with sealed bearings that run quietly, resist the corrosion that South Florida’s humid, salty air causes in cheap zinc hardware, and adjust in seconds for perfect panel alignment.
Sealed Stainless Bearings
Quiet, corrosion-resistant rollers that carry the door’s full weight on the track, so the glass glides with two fingers.
Soft-Close Dampers
Available on many systems, easing the panel into place instead of letting it rattle home.
- Rollers adjust in seconds for perfect panel alignment
- Roller finishes matched to your bathroom hardware
- Quality stainless units on every replacement
Frameless vs. Framed Sliding Doors
Framed bypass doors are the budget option, but the aluminum frame is exactly where soap scum collects and corrosion starts. A frameless slider replaces most of that metal with glass: fewer tracks to scrub, a lighter visual footprint, and noticeably smoother operation. In steam showers and primary baths especially, the difference in look and resale value is immediate. We install both and quote them side by side so you can decide with real numbers.
Fewer Tracks to Scrub
Lighter Visual Footprint
Noticeably Smoother Operation
Already have a slider that jumps, drags, or rattles? Most sliding door problems are repairable in one visit: worn rollers, dirty or damaged tracks, misaligned panels, and failing seals and sweeps. We replace rollers with quality stainless units, re-level panels, and source seals for most existing enclosures. If the glass itself is damaged, we can fabricate a replacement panel to fit your existing track. See all of our glass repair services or browse replacement hardware.
What to Expect
- Free measure & quote — we confirm your opening, show roller and glass options, and quote on the spot.
- Fabrication — typically five to seven business days for tempered panels.
- Install — a few hours, floors protected, site left clean.
- Tune-ups anytime — adjustments and roller replacements for the life of the door.
Serving Miami-Dade & Broward
We install and repair sliding shower doors across Miami-Dade County and Broward County, from Aventura and Miami Beach to Pembroke Pines, Hollywood, and Fort Lauderdale. Call 305-814-7483 or 954-591-8317 for a free estimate. We also publish city-by-city guides for Miami, Miami Beach, Hialeah, Coral Gables, Doral, Kendall, Aventura, Sunny Isles Beach, North Miami, Fort Lauderdale, Hollywood, Pembroke Pines. ¡También hablamos Español! Lea esta página en español.
Sliding & Bypass Configurations We Build
Sliding glass is not one product — it is a family of systems, and the right one depends on your opening, your budget, and who uses the shower:
- Two-panel bypass — the space saver. Both panels slide past each other; no swing clearance needed at all. The go-to for tight Miami condo bathrooms.
- Barn-style single slider — one heavy 3/8” tempered panel rolling on an exposed stainless track above the door line. The design-forward look.
- Tub-track sliders — replace a curtain over the tub without touching the tile. Fast, affordable, and fully removable later.
- Framed replacement sliders — when the existing aluminum frame is fine but the glass or rollers are shot, we rebuild instead of ripping out.
Wondering whether sliding is even the right category for your bathroom? A swinging frameless door shows glass better when clearance allows — we lay out both options at the free measure visit with honest pricing for each.
What Sliding Door Repair Typically Costs
Most sliding-door service calls in our area land between $150 and $400: roller pairs in quality stainless run $150–$300 installed, guide buttons and door sweeps $75–$150, and track cleaning with re-leveling at the low end. Custom tempered replacement panels are quoted by size and thickness. Our rule of thumb is simple — if the track and glass are sound, repair; if the frame is corroded or the glass is dated overlay or plexi, replace. We stock common rollers, guides and seals, so most repairs finish in a single visit.
Keeping Sliding Glass Rolling for Years
South Florida hard water is the enemy of tracks and rollers: scale builds up in the channel, rollers grind over it, and the door starts jumping. A monthly wipe of the track with white vinegar, a microfiber cloth on the panels, and a silicone-based (never oil-based) lubricant on the rollers will double the life of the system. Our full routine is in how to clean frameless shower glass and beat hard water — the same rules apply to sliders.
Sliding Shower Door FAQ
Most frameless sliding enclosures run between $1,000 and $3,000 installed, depending on the number of panels, glass thickness, roller system, and finish. Barn-style doors in 1/2” glass sit at the top of that range. Repairs, by contrast, often cost a few hundred dollars — always ask before replacing.
If the glass is intact and the problem is sticking, rattling, or misalignment, repair usually wins — new rollers and a track service restore like-new operation for a fraction of replacement. Replace when the glass is damaged, the hardware is discontinued, or corrosion in the track has gone too far. We assess both options honestly on site.
Quality stainless-steel rollers typically last 10 years or more in normal use; budget hardware can fail in two or three, especially with hard water and humidity. Signs of wear include squeaking, dragging, and visible rust or play in the wheel. Rollers are replaceable without touching the glass.
Single barn-style sliders work on surprisingly narrow openings, and bypass configurations cover everything from standard tub length (60 inches) up. The real question is weight and proportion, which we confirm at the free measure. Almost any opening that fits a framed slider fits a frameless one.
Properly engineered, no. Barn doors run with overlap guides at the bottom, full-height side seals, and polycarbonate sweeps that keep spray inside. Because there’s no bottom track in most designs, the key is aiming the showerhead correctly — we review that with you at installation.
After fabrication (typically five to seven business days), installation takes a few hours. Track, rollers, and panels go up in one visit, and we test the glide and seals before we leave.
Squeegee the glass, wipe the track monthly with a damp cloth, and never use abrasive cleaners on either. A drop of silicone lubricant on roller axles once a year keeps everything quiet. Avoid WD-40-type sprays, which attract grit and gum up sealed bearings.